Why choose the crane pendant push buttons for EOT crane?

What is a pendant push button:

The EOT cranes and hoists are controlled by a wired or wireless device. The wired device has a cable wire which is connected to the hoist. The cable wire is directly connected to the controlling device of the crane. The wire is suspended from the hoist crane and hung like a pendant hence it is known as the crane pendant push button. The crane pendant is a main part of the crane and it is also called a crane pendant station or crane control unit. This device manages the EOT crane & hoist and can be controlled in a direction like long travel, cross travel, and lifting and lowering heavy-duty objects with the hoist. The crane pendant switch work on completely wired systems and they don't need a charging system or battery instead they take electric power as same as the EOT crane gets.   

 

Working behavior of crane pendant push button station:

As we know the crane pendant push button is directly connected to the EOT crane through a long cable wire known as crane pendant cable. And this crane pendant station is used by the operators to manage the crane. Generally, there are two operators required to controlling the EOT crane. The first goes into the cabin of the overhead crane to check and maintain the order of the EOT crane while the second operator stays on the ground floor to guide and gives the signal to the other operator. The ground operator also has to walk with the crane moment when the overhead crane traverse the cross line due to wire connectivity. While walking with the overhead crane the operator has to be careful, because while controlling the crane the operator can be messed up with the obstacles which is potentially dangerous.

 

Types of crane pendant push buttons:

The pendant push button control for overhead crane comes in various types with features and attributes and they are as follows. 

 

2 Buttons crane pendant:

It is used to moves to the crane in an up and down direction.

 

4 Buttons crane pendant:

The 4 buttons crane pendant is equipped with the up, down, start, and stop configurations.

 

6 Buttons crane pendant:

The six buttons crane pendant is used for start, stop, up, down, east and west directions.

 

8 Buttons crane pendant:

This type of device is used to control the crane for start, stop, east, west, up, down, north, and south directions.

 

10 Buttons crane pendant:

The 10 buttons crane pendant is configured with the one-speed version, two-speed version, start, stop, up, down, north, south, east and west moments.

 

 

Need of crane pendant control switch:

The pendant switch for hoist is configured with the wired systems which provide a fast and secure connection between the crane pendant and overhead crane. The crane pendant is connected with many wired routes because of this if an error or dead spot is found in any route then immediately switches the network and continue with the communication. In the case of wireless radio remote control systems if any lag or error is found then the device stops them from working immediately. The wired connection is also helpful in the external interruption.

 

 

Conclusion:

To get a fast and secure connection the pendant crane control can be considered first. The pendant push button has some advantages and also comes with pitfalls. It comes with the wired system which helps in the fast transmission but there is some drawback that the operator has to inside the overhead crane which is very risky. Depending upon the features you can buy the pendant push button for EOT crane from Anand systems engineering Pvt. Ltd., because it is the leading crane pendant control manufacturers in India. The Anand crane pendants are made in such a way that it provides the durability and stability that means it can be used for a longer time with a good condition.