What is a crane pendant station and how does it work?
Crane Pendant:
The Crane pendant is nothing but a connection from the
overhead crane to the controller through the wired system. And the wire hangs
from the crane looks like a pendant that is why it is known as a crane pendant.
The crane pendant is controlled by a device called a crane pendant push
button station. This crane control unit is the main part of the crane. This
controller moves the crane in a direction like long travel, cross travel,
lifting and lowering, and heavy objects. The Crane pendant is the first place
where crane inspectors or maintenance personnel should check in the event of a
failure. It draws power from the same power source that powers the crane itself.
Working of
crane pendant station:
The overhead crane and pendant push button are connected
through a long cable. And the overhead crane is controlled by crane control
unit. The pendant switch comes in various button types like 2 buttons, 4
buttons, 6 buttons, 8 buttons, and 10 buttons. These different types of
pushbuttons and has their own features and controls. Mostly the
crane is operated by an operator who sits in the cabin of the crane and is
guided by another operator from the ground. So there is much need for
communication between the operators.
The pendant control switch can be connected to the crane itself, or like many modern cranes, it can be a remote radio unit. The operator control the cranes with the help of cable connected to the pendant. When the crane crosses the runway, the operator walks beside the crane. You can use the pendant to control the lifting of the load. The crane control unit contains a low power duty switch that is connected to the cable. The user has to manually push the buttons on the pendant switch in order to move the crane.
Benefits of
pendant switch for hoist:
The main benefit of the pendant switch is that it comes
with a wired system. This means there is no external interruption of current in
a crane control unit. The pendant switch is hung from the crane so there is
very little chance of dropping the control or misplacing it. The crane pendant
control switch fully works on the wired system so there is no need for a
battery for replacement. The eot crane pendant is designed in such a way that
it can lift and lower heavy objects as they enable a direct line of sight
control for the motors. In the pendant switch for EOT crane we can use one
button at a time it means that if we want to move the crane in a particular
direction then we have to press the button continuously until it reaches its
direction.
Supplier of pendant
push button switch:
Since the industrial sector is increasing widely due to
this industry works and equipments are more in demand. Pendant push buttons are
also one of them. And it is manufacturing from many companies as required. But
the best crane pendant control manufacturers in India are produced by Anand
systems engineering private limited. This pendant switch is customizable and
durable according to the customer's needs. The crane pendant is designed in
such a way that it can be used in harsh conditions and for a long time
duration.
Conclusion:
To lifting and handling heavy objects the push button can be preferred over the radio remote control. The pendant push button is specially designed for EOT cranes and heavy industrial equipment. And the main thing is that the pendant switch comes with a wired system that provides reliability and stability.
Comments
Post a Comment